weather coat

10:21:00 Topnews 0 Comments





All-weather
shutterstock_16769296
shutterstock
Brighto all weather is an excellent quality emulsion which is specially formulated for use on all exterior surfaces. Brighto All Weather gives highly durable finish, long lasting protection & decoration to all exterior surfaces. The smooth finish of Brighto All Weather has the highest degree of durability and is resistant to all types of weather conditions. It is specially developed for exterior surfaces including brick work, plaster, concrete, wall boards, gypsum etc.

Product Name:

Brighto All Weather (Acrylic based)

Usage:

Brighto All Weather is used for new or previously painted exterior masonry surfaces such as brickwork, plaster and cement rendering.

Pack Size:

1Ltr., 4Ltr., 16Ltr.

Color Range:

See appropriate shade card

Drying Times:

Depends on temperature, humidity, air movements and film thickness
Touch dry:2 – 3 Hours
Re-coat:6 – 8 Hours

Application:

1.Brush
2.Roller
3.Spray

No. Of Coats:

2 or more

Thinning:

Brush or Roller:10 – 25% for brush or roller
Conventional spray:30 – 40 % for spray

Cleaning Up:

Clean all equipment with water after use.

Spray Recommendations:

Conventional spray satisfactory through most equipment

Film Properties:

Water Resistance: resistant to the levels of atmospheric humidity present in normal environments.

Composition (Nominal):

Pigment: Light fast pigments
Binder: Acrylic co polymer emulsion.
Solvent: Water

Volume Solids:

White 40 ± 2% (nominal), other colors will vary

Film Thickness/Coat :

Wet: 75 – 100 Micrometers
Dry: 30 – 40 Micrometers

Practical Coverage:

The spreading capacity of this product will vary considerably according to the roughness and porosity of the surface. On smooth surface of average porosity is
10-14m2 /ltr./coat.

Surface Preparation:

New, bare, old or previously painted surfaces must be clean, dry and free from dust or wax. Clean the surface by rubbing down with abrasive paper. Brush down previously painted surface completely and make the surface smooth. For large holes and cracks, use plaster of Paris or white cement. Allow to dry. Apply Brighto Exterior Primer in order to seal the surface from water and salts. Allow surface to dry completely. Then apply Brighto Exterior Filler and allow it to dry. Rub down the surface with abrasive paper and dust off. Now the surface will be smooth and ready for Brighto All Weather to be applied. Stir the paint thoroughly before use.
dt

Color Palette


Almond:
7103
Pearl:
7211
Lilac Dream:
7101
Ash White:
7424
Magnolia:
7125
Porcelain Peach:
7203
Marsh Mallow White:
7104
Sky Grey:
7829
Off White:
7121
Sugar Cane:
7122
Autumn Stone:
7123
Honey Milk:
7207
Sweet Jewel:
7111
Sand Stone:
7525
Moon Shade:
7109
Silk Stone:
7120
Hop Sack:
7128
Beige:
7626
Cameo:
7127
Sweet Peach:
7108
Sahara Sand:
7800
Wire Work Grey:
7102
Port Land:
7826
Clay:
7129
Tea Rose:
7526
Desert Dawn:
7206
Cinnamon:
7426
Antelope:
7848
Goose Wing:
7828
Green Yellow:
7100
Dusty Stone:
7105
Molten Bronze:
7205
Tile Red:
7020
Moorland:
7820
Green Stone:
7920
Camel Coat:
7201
Terracotta:
7023
Red Oxide:
7021
Charcoal:
7017
Sea Wind:
7204
Stone Grey:
7200
Lagoon:
7823
Rex Yellow:
7326
Roof Tile:
7022
Beaver:
7009
Admiral:
7821
Blue Green:
7202
Silver Mist:
7727
Spring Green:
7929
Golden Needles:
7107
Brighto Mauve:
7900
Jade:
7822
Rado Green:
7666
Mossy Fern:
7106




0 comments: