super emlusion
Brighto Super Emulsion
Brighto Super Emulsion is superior quality paint. It is specially formulated. It has excellent application properties and a smooth pleasing finish. It can be applied on interior walls, ceiling, old new concrete plaster, chipboard and hard board.
Product Name:
Brighto super emulsion
Usage:
Brighto Super Emulsion is used for all normal interior masonry surfaces including brickwork, plaster, cement and wallboard.
Pack Size:
0.91Ltr. , 3.64Ltr. , 14.56Ltr.
Color Range:
See appropriate shade card
Drying Times:
Its Depend on temperature, humidity, air movements and film thickness
Touch Dry:2 – 3 Hours
Recoat:5 – 6 Hours
Touch Dry:2 – 3 Hours
Recoat:5 – 6 Hours
Application
Brush
Roller
Spray
Roller
Spray
Cleaning Up:
Clean all equipment with water immediately
after use.
after use.
Thinning:
Brush or roller or spray 10 – 50% depending upon application methodology
System Information:
Powdery surfaces,
Alkaline and new surfaces,
Normal, sound surfaces
Alkaline and new surfaces,
Normal, sound surfaces
(Previously painted)
Practical Coverage:
A guide to the practical coverage which can be achieved under normal conditions is
10 – 14 m2 /Ltr. /coat.
Spray Recommendations:
Conventional spray satisfactory through most equipment
Film Properties:
Water resistance
Will tolerate the levels of atmospheric humidity present in normal environments.
Will tolerate the levels of atmospheric humidity present in normal environments.
Composition (Nominal):
Pigment:Light fast pigments
Binder: PVA co polymer emulsion
Solvent:Water
Binder: PVA co polymer emulsion
Solvent:Water
Volume Solids:
White 42 ± 2% (nominal), other colors will vary.
Film Thickness/Coat:
Wet:75 – 100 Micrometers
Dry :30 – 44 Micrometers
Dry :30 – 44 Micrometers
Surface Preparation:
New, bare, old or previously painted surfaces must be clean, dry and free from dust or wax. Clean the surface by rubbing down with abrasive paper. Brush down previously painted surface completely and make the surface smooth. For large holes and cracks, use plaster of Paris or white cement .Allow to dry. Apply Brighto Super Sealer in order to seal the surface from water and salts. Allow surface to dry completely. Then apply Brighto Super Filler and allow it to dry. Rub down the surface with abrasive paper and dust off. Now the surface will be smooth and ready for Brighto Super Emulsion to be applied. Stir the paint thoroughly before use.
Color Palette
Lily White:
9069
9069
Ash White:
9041
9041
Blossom:
9304
9304
Bluebell White:
9080
9080
Rose White:
9070
9070
Lavender White:
9071
9071
Palm Peach Pink:
9302
9302
Lime Fizz:
9691
9691
Off White:
9012
9012
Cream:
9001
9001
CockleShell:
9072
9072
Champagne:
9306
9306
Badami:
9048
9048
Summer Pink:
9300
9300
Apple Green:
9027
9027
Bone White:
9693
9693
Gardenia:
9301
9301
Rose Petal:
9050
9050
Peach Cream:
9040
9040
Sand Stone:
9042
9042
Coca Milk:
9305
9305
Melody Green:
9010
9010
Brighto Off White:
9013
9013
Pale Peach:
9045
9045
Zephyr:
9303
9303
Cameo:
9687
9687
Apricot:
9024
9024
Stone:
9017
9017
Brighto Green:
9004
9004
Pine Frost:
9689
9689
Ice Grey:
9681
9681
Soothing Lilac:
9683
9683
Rose Pink:
9015
9015
Apple White:
9073
9073
Charisma:
9682
9682
Ice Blue:
9014
9014
Brighto Pink:
9009
9009
Lime Green:
9006
9006
Whisper:
9043
9043
Light Blue:
9002
9002
Mallow:
9685
9685
Elegance:
9047
9047
Dove Grey:
9046
9046
Brighto Blue:
9008
9008
Parasol:
9692
9692
Pastle Green:
9690
9690
Goose Wing:
9684
9684
Blue Heaven:
9030
9030
Lilac:
9011
9011
Tea Rose:
9686
9686
Brighto Red:
9007
9007
Terracotta:
9698
9698
Leaf Green:
9035
9035
Orange:
9005
9005
Chocolate:
9022
9022
Jade:
9026
9026
Coral Spice:
9688
9688
0 comments: