enamal

10:31:00 Topnews 1 Comments

Brighto Synthetic Enamel


Synthatic-Enamel
shutterstock_61413553
shutterstock_512210
Brighto All Purpose Synthetic Enamel is top quality synthetic enamel made from highest quality resin pigmented with carefully selected pigments. It produces a hard, durable finish and maximum gloss retention. It has excellent brush ability and opacity. It can be scrubbed hard. It is suitable for both interior and exterior use.

Product Name:

Brighto all purpose synthetic enamel

Usage:

Brighto All Purpose Synthetic Enamel is a high quality solvent-based super gloss finish, suitable for use on all types of interior and exterior wood, metal and cemented surfaces. Brighto All Purpose Synthetic Enamel gives a smooth mirror like finish and has excellent durability.

Pack Size:

0.25Ltr. , 0.91Ltr., 3.64Ltr. , 14.56Ltr.

Color Range:

See appropriate shade card

Drying Times:

It Depends on temperature, humidity, air movements and film thickness
Touch Dry:3  -  4   Hours
Dry to Recoat:10 – 12  Hours
Hard Dry:24 Hours

Practical Coverage:

A guide to the practical coverage which can be achieved
under normal conditions is 10 – 20 m2 /ltr. /coat.

Application:

Brush
Roller
Spray

Spray Recommendations:

Conventional Spray
Satisfactory through most equipment

Cleaning Up:

Clean all equipment with mineral turpentine immediately after use.

System Information:

Wood
Metal
Automobile

Film Thickness/Coat:

Wet:50 – 75 Micrometers
Dry :23 – 38 Micrometers

Film Properties:

Chemical resistance
Resistant to mild chemical fume attack.

Water Resistance:

Resistant to the levels of atmospheric humidity present in normal environment

Composition (Nominal):

Pigment:Lightfast pigments
Binder: Alkyd Resin
Solvent:Mineral turpentine

Volume Solids:

White 48 ± 2% (nominal), other colors will vary.

Flash Point:

38 0 C

Thinning:

Brush or Roller:10 – 25% for  Brush or Roller
Conventional spray:30 – 40 % for  Spray

Surface Preparation:

New, bare, old or previously painted surfaces must be clean, dry and free from wax, dust, rust and all unwanted material. Clean the surface by rubbing down with abrasive paper. Brush down previously painted surfaces and dust it off. Apply Brighto Red Oxide Primer on all metal surfaces in order to prevent from rust. Apply Brighto undercoat on all wood surfaces. Apply Brighto Grey Oil Putty on all automobile surfaces. Allow the surfaces to dry completely. Stir thoroughly before use.

Color Palette


Off White:
3101
Bone White:
3051
Ash White:
3042
Peach Shadow:
3114
Court Grey:
3080
Clay:
3055
Light Green:
3400
Eau-De-Nil:
3073
Cream:
3001
Diyar:
3078
Pumice:
3076
Brighto Grey:
3005
Antelope:
3084
Sea Green:
3027
Spring Green:
3028
Lemon:
3006
Beige:
3050
Oyster:
3072
Smoke Grey:
3105
Champagne:
3077
Adams Green:
3023
Grey Green:
3053
Golden Yellow:
3007
Pale Cream:
3071
Light Grey:
3003
Dark Grey:
3004
Brighto Brown:
3031
Emerald:
3022
Signal Green:
3025
Comet Blue:
3070
Mauve:
3401
Pink:
3052
Coriander:
3030
Dark Brown:
3075
Royal Green:
3041
Orange:
3002
Light Blue:
3016
Violet:
3033
Red Rose:
3020
Ochre:
3029
Royal Blue:
3018
Scarab:
3019
Crimson:
3012
Brighto Blue:
3017
Deep Blue:
3032
Signal Red:
3008
Golden Brown:
3074
Vivid Blue:
3035
H.R Blue:
3034
P.O Red:
3009
Baby Pink:
3115
Red Oxide:
3011
Emerald:
3022

1 comment:

Subscribe to: Posts (Atom)